Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model
Medusa - Physical Model

Medusa - Physical Model

£45.00
Unit price per
Tax included.
Regular price
Added to Cart! View cart or continue shopping.

In this tale Medusa is a victim. Betrayed by Athena, the goddess whom she served, thanks to the actions of Poseidon. The story goes that Medusa, a priestess of Athena, was a woman of amazing beauty. Her eyes and hair were so beautiful that she alone drew patrons to the temple of Athena from all over Greece just so they could admire her. Athena was grew jealous of this mortal's good looks over time.

While walking the cliffs and admiring the ocean, Poseidon saw her and became infatuated with her. He appeared to Medusa and asked for her hand. Ever the devoted priestess, she declined the gods offer, which enraged Poseidon. The Greek gods were not known to take rejection lightly, and so Poseidon sexually assaulted Medusa in Athena's own temple. When Athena found out, she was outraged that such an act had taken place in her temple but no god could punish another, and so her anger was turned to Medusa instead. Jealous of her beautiful hair and eyes she turned her hair into live snakes, and cursed Medusa with eyes that would turn men to stone should they gaze into them.

Distraught and hunted as a monster, Medusa hid herself a way and was cursed forevermore to repel attempts on her life with each petrified would-be hero reminding her of the horror she had been turned into.

Dimensions and Features

Please note that 1:10 scale is the intended scale for these models.

1:14 Scale Statue Height: approx 177mm*

1:14 Bust Height: approx 121mm*

1:10 Scale Statue Height: approx 253mm*

1:10 Bust Height: approx 173mm*

 

*Height measurements are approximate and are measured from the bottom of the base to the tallest point of the model and don't take into account additional head options.

Magnet Wells: Head, torso, arms, hips and legs

1:14 can use 4x2mm round

1:10 scale uses 6x3mm round 

Post Processing Level

Once a piece has been 3D printed it requires post processing. Supports are necessary to ensure the print is successful and models must be hollowed and drainage holes need to be included. Generally speaking drain holes are placed in non-visible areas so these are rarely an issue. However, the supports must be removed before the part is cured. Removing the supports will often leave behind small nicks or nubs on the surface that must be either filled or sanded/filed. You can choose whether or not we do this for you. See below for details.

Basic - Parts are cleaned, supports are clipped off and part is post-cured. Expect to do some clean up such as sanding support nubs or small filling of support nicks and surface smoothing.

Advanced - We will do all of it for you. While we cannot guarantee that the received item will be entirely perfect (we're still human and some marks only show up after priming), we will deal with the vast majority of clean up leaving you very little to do yourself. Please expect a longer lead time if you select this option.

NOTE: You will need to do any gap fillings yourselves as we send the Physical Models in parts.

Lead Time and Shipping

All models are made to order and thus you should expect a lead time in order to prepare, print, post-process and ship your order. This should be no longer than a few days if you have selected basic post-processing but please allow up to a week if you're planning your purchase for an occasion or gift or sometimes a bit longer if you have selected advanced post-processing. 

Free shipping to UK for orders of £55 or more.
Free shipping to Europe for orders of £75 or more.

Quality

We print figures at 30 micron layer heights (0.03mm) and bases at 50 microns (0.05mm)

Please handle with care, as the model parts are very delicate.

Note

The model you receive will have been 3D printed. In order for a model to be 3D printed it has to be hollow to allow for proper cleaning and curing. Vent holes are placed in areas that are not on show to facilitate this. In some rare instances there may be a hole in a visible area and will need filling. All models require supports in order to print correctly. While all parts should fit without issue, you may find it necessary to undertake minor sanding, gap filling, clean up and priming yourself.

You may notice some staining on your printed parts. This is a side effect of using IPA for the cleaning process. This staining is present on all 3D printed parts but less noticeable on grey or lighter coloured resin. Rest assured that this staining will not effect surface quality and will cover perfectly fine with primer.

Most kits are straight forward and easy to assemble using common sense and the imagery. Should directions be necessary you will find an insert in the package with information.